Removing 1993 yamaha g9 shifter cables

Dfishingski · 04-26-2021, 04:41 AM

So trying to remove shifter cables I have them all disconnected except for where they connect to the shifter arm on trans. Can these be removed individually from this arm or do you just need to remove the arm and both cables as an assembly?

slonomo · 04-26-2021, 05:05 AM

You can remove them either way. The cables are very similar to bicycle brake cables with barrel ends. There are springs that hold them in place. The shifter lever on the trans is also bolted on so you can remove that as an assembly, I think it's a 10mm bolt.

Dfishingski · 04-26-2021, 05:44 AM

Yes I see the barrels the ones I'm familiar with usually have a slot to pass the wire through and slide the barrel out the side not seeing any kinda of such slot here

Dfishingski · 04-27-2021, 08:05 AM

Removed shifter arm after marking it and even with this off in my hand I don't see how these cables could be removed from this arm but hey the main thing is I got them off out of my way

04-26-2021, 04:41 AM	#1
Dfishingski Not Yet Wild Join Date: Apr 2021 Posts: 5	Removing 1993 yamaha g9 shifter cables So trying to remove shifter cables I have them all disconnected except for where they connect to the shifter arm on trans. Can these be removed individually from this arm or do you just need to remove the arm and both cables as an assembly?
Dfishingski Not Yet Wild Join Date: Apr 2021 Posts: 5

04-26-2021, 05:05 AM	#2
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,436	Re: Removing 1993 yamaha g9 shifter cables You can remove them either way. The cables are very similar to bicycle brake cables with barrel ends. There are springs that hold them in place. The shifter lever on the trans is also bolted on so you can remove that as an assembly, I think it's a 10mm bolt.

04-26-2021, 05:44 AM	#3
Dfishingski Not Yet Wild Join Date: Apr 2021 Posts: 5	Re: Removing 1993 yamaha g9 shifter cables Yes I see the barrels the ones I'm familiar with usually have a slot to pass the wire through and slide the barrel out the side not seeing any kinda of such slot here
Dfishingski Not Yet Wild Join Date: Apr 2021 Posts: 5

04-27-2021, 08:05 AM	#4
Dfishingski Not Yet Wild Join Date: Apr 2021 Posts: 5	Re: Removing 1993 yamaha g9 shifter cables Removed shifter arm after marking it and even with this off in my hand I don't see how these cables could be removed from this arm but hey the main thing is I got them off out of my way
Dfishingski Not Yet Wild Join Date: Apr 2021 Posts: 5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
dang shifter cables	Gas EZGO
Custom brake and shifter cables	Lifted Golf Carts
G2 shifter cables	Gas Yamaha
96 EZ GO shifter cables	Golf Carts and Parts
TXT Shifter Cables	Gas EZGO