|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-07-2021, 09:30 AM | #1 |
Not Yet Wild
Join Date: May 2008
Posts: 24
|
2010 Drive Shift Problem
Sometimes (not often) when I shift from forward to reverse, and vice versa, I have to rock the cart just a bit for the gears to mesh. I thought it might be a linkage issue, but when I shift, one of the cables goes slack just a tad until i rock the cart. I’m now thinking maybe there is something amiss inside the transaxle? There are cable end adjustments on the firewall. Do I dare try to adjust them? Thanks for any help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-16-2021, 07:13 AM | #2 |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 643
|
Re: 2010 Drive Shift Problem
Its always a good idea to check the oil level in the transaxle but I suspect that you have a problem with the shift cables getting tight due to rust or dirt.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 Yamaha Drive Gas Problem | Gas Yamaha | |||
Unitized Transaxle Wont Shift using shift lever | Gas Club Car | |||
G2 Hard to shift, Problem is NOT cable | Gas Yamaha | |||
shift problem | Gas Club Car | |||
shift cable problem | Gas Club Car |