|
09-28-2009, 06:52 PM
|
#1 |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Removing ignition switch
Putting on a dash panel with my upgrades on my 95 gasser. How do you get the ignition switch out of the original panel so as to be able to put it in the new dash? I guess it unscrews somehow but as yet have been able to figure it out.
CartTrader |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-29-2009, 06:08 AM
|
#2 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: Removing ignition switch
You know the "dome" with the slot it it, on the face of your dash?
It's just a protective cover! Pry it off with a small flat bladed screwdriver... don't worry, it's pressure fit, it'll just slide off! and then the mounting nut will be exposed! Then toss the dome cover, because it won't work on your new dash! You also might consiter getting a backing nut or nylon washers, so your switch won't stick out too far!  |
|
|
|
|
09-29-2009, 07:22 AM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Removing ignition switch
Disconnect one end of the battery first! It is too easy to short something out in there!
|
|
|
|
|
09-29-2009, 07:45 AM
|
#4 | |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: Removing ignition switch
Quote:
 |
|
|
|
|
|
09-29-2009, 09:02 AM
|
#5 | |
|
Gone Wild
Join Date: Aug 2009
Posts: 179
|
Re: Removing ignition switch
Quote:
 |
|
|
|
|
|
09-29-2009, 09:04 AM
|
#6 | |
|
Gone Crazy
Join Date: Jun 2008
Location: Mississippi
Posts: 2,183
|
Re: Removing ignition switch
Quote:
 |
|
|
|
|
|
09-29-2009, 11:25 AM
|
#7 | |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Removing ignition switch
Quote:
 Good advice on the battery ..BUT..I already have it disconnected and the body is off the cart...putting on a new custom one.....Does anyone know where to get the foam insulation pads that are on the body around the engine compartment? I assume they are for sound deadening. CartTrader |
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Key ignition switch | Gas Club Car | |||
| Ignition Switch | Big Block Talk! | |||
| Ignition switch fir B/S 20 hp | Big Block Talk! | |||
| Removing key ignition | Electric EZGO | |||
| New Ignition Switch | Gas EZGO | |||
Linear Mode
