|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-07-2020, 12:43 PM | #1 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Used parts source? I need a pedal assembly
Working on a 2007 Precedent that looks like was driven through Hell and back. Emergency brake was stuck, got three of the four torx bolts out and had to use vice grips on the fourth. Got the assembly out and all of the steel parts are heavily rusted out, beyond Evaporusting. Is there a good source for used parts to get this thing going? The part number decal is gone. Also need a few of the bolts/screws that are on the floorboards, especially the large ones towards the back, under the body.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-08-2020, 06:55 AM | #2 | |
Gone Wild
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 550
|
Re: Used parts source? I need a pedal assembly
Quote:
|
|
10-08-2020, 09:48 AM | #3 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Used parts source? I need a pedal assembly
And he actually did have one in stock. Fortunately the one part that it needed is still good on the original one, so I should be GTG.
|
10-08-2020, 11:34 AM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Used parts source? I need a pedal assembly
Glad to here Dave had what you needed.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
looks like a need a good pedal assembly or a ... | Electric EZGO | |||
Best source for rear seat assembly? | Drivers Clubs | |||
Brake Pedal pad assembly | Electric EZGO | |||
Pedal Assembly | Electric Club Car | |||
2nd gen brake pedal assembly | Electric Club Car |