04-15-2015, 10:09 AM | #1 |
Not Yet Wild
Join Date: Apr 2015
Posts: 3
|
Confused
How to wire a crowfoot cable to power wise 2 charger where does the red wire go thank you
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-15-2015, 10:45 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Confused
Typically in charger output cables, the black wire is negative and the White wire positive and third wire is the battery sense wire. The battery sense wire should be connected to the same crowfoot terminal as the Negative (black) wire.
|
04-15-2015, 11:30 AM | #3 |
Not Yet Wild
Join Date: Apr 2015
Posts: 3
|
Re: Confused
Inside of the charger where the little red wire from the power wise cable where does it go when I connect the crowfoot cable up thank you
|
04-15-2015, 12:00 PM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Confused
Inside the charger, the red wire in the output cable connects to the small black wire that goes to the control module.
To use a two wire output cable, connect the black wire from the control module to the same place the heavy black wire in the output cable connects. Attached are schematics with three wire and two wire output cables. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Thoroughly Confused ! ! ! | On Road Golf Carts! | |||
still confused | Gas Yamaha | |||
confused | Gas Yamaha | |||
Confused..... Trying to buy... | Electric EZGO |