|
07-15-2015, 08:01 PM
|
#1 |
|
Gone Wild
Join Date: Nov 2013
Location: thomasville nc
Posts: 190
|
Controller
My Curtis controller doesn't say s-1 or m-1 on it,I got a new all track from Scotty so how do I know where the wires go, the Curtis also has 4 lugs and the alltrax only has three. Thanks guys!!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-15-2015, 09:07 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Controller
No Problem. Since you posted in Ezgo section about a 4 lug control it must be a series cart.
The new control is a more modern 3 lug unit. The extra lug which has been dropped is labeled A2. Two cables go to control A2 terminal. 1 from the F&R switch and 1 from motor A2. Basically these 2 cables splice together and make one cable which bypasses the control and makes a run from Motor A2 to F&R without going to the 4th lug on the control. Questions? |
|
|
|
07-16-2015, 03:30 AM
|
#3 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Controller
Here's a diagram for an AXE.
|
|
|
|
|
07-16-2015, 10:42 AM
|
#4 |
|
Gone Wild
Join Date: Nov 2013
Location: thomasville nc
Posts: 190
|
Re: Controller
Yes it is an ezgo the wiring is botched in this cart I'm gonna try to figure it out today! Thanks Scotty and you to yurtle! I know if I have problems you guys always help!
|
|
|
|
|
07-16-2015, 08:41 PM
|
#5 |
|
Gone Wild
Join Date: Nov 2013
Location: thomasville nc
Posts: 190
|
Re: Controller
Scotty do I need to wire the spm 48500 like the book says? The controller that was in the cart wasn't wired that way. It's a 1998 ezgo txt series cart thanks. Or yurtle I know yurtle is up late thanks guys!!!!
 Last edited by Naturile; 07-16-2015 at 08:42 PM.. Reason: Spelling |
|
|
|
|
07-16-2015, 08:48 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Controller
YES YES YES> follow the cable diagram supplied by Alltrax for the SPM controller. ....... Take it one cable at a time. There are only subtle differences.
|
|
|
|
|
07-17-2015, 09:07 AM
|
#7 |
|
Gone Wild
Join Date: Nov 2013
Location: thomasville nc
Posts: 190
|
Re: Controller
Alright thanks Scotty !
|
|
|
|
|
07-17-2015, 09:09 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Controller
Keep us posted - I'll check back
|
|
|
|
|
07-18-2015, 09:33 PM
|
#9 |
|
Gone Wild
Join Date: Nov 2013
Location: thomasville nc
Posts: 190
|
Re: Controller
All right no time to mess with it today maybe Monday thanks
|
|
|
|
|
07-22-2015, 09:09 PM
|
#10 |
|
Gone Wild
Join Date: Nov 2013
Location: thomasville nc
Posts: 190
|
Re: Controller
Scotty where does the cable from f/r switch in diagram does it go across m- or does it connect to m-, and then go to the pos or neg on selonoid? I'm an idiot at wiring I marked the cables but this cart has so many wires going everywhere? I got the spam 48500 from you just haven't had much time to work on it Thanks so much
help: |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
| WTS/WTT 400amp SepEx Controller for Series Controller | Golf Carts and Parts | |||
| RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
| Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
| Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
Linear Mode
