|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-22-2015, 08:27 PM | #1 |
Not Yet Wild
Join Date: Jul 2015
Posts: 30
|
Upgraded my 97 txt to 48v having concerns
Well I installed an new F&R switch, spm 48500 controller, solenoid 400 amps, new cables and 6 8v batteries. Where can I get the placement of wires going to the F&R switch?
Cart wont move but solenoid clicks. My old solenoid hook up is different then the one I purchased. Solenoid is one of Scotty's 400 amp any help would be appreciated! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-22-2015, 10:29 PM | #2 |
Not Yet Wild
Join Date: Jul 2015
Posts: 30
|
Re: Upgraded my 97 txt to 48v having concerns
Found the wiring diagram need on you tube!
|
10-22-2015, 10:38 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Upgraded my 97 txt to 48v having concerns
The solenoid is the same as the OEM in that they both have 2 small terminals and 2 big terminals and the 2 big cables that went to the old solenoid go to the new big terminals and the small wires that went to the small terminals go to the same small terminals. How much more the same can they not be?
|
10-22-2015, 10:53 PM | #4 | |
Not Yet Wild
Join Date: Jul 2015
Posts: 30
|
Re: Upgraded my 97 txt to 48v having concerns
Quote:
|
|
10-23-2015, 12:13 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Upgraded my 97 txt to 48v having concerns
|
|
|
Similar Threads | ||||
Thread | Forum | |||
PQ Bandit Concerns | Electric Club Car | |||
G1 running concerns | Gas Yamaha | |||
Charger concerns | Electric Club Car | |||
primary concerns | Electric Club Car |