![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#11 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 72,380
|
![]() The controller is working. the throttle signal is working. the solenoid is working.
Most likely the trouble is bad contact in the F&R switch or a bad cable end. Less likely but possible, bad motor. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#12 |
Not Yet Wild
Join Date: Jul 2015
Posts: 12
|
![]() I replaced the f & R switch about 8 months ago to an HD one and also replaced the motor at someone else's suggestion and it didn't work. Thanks for your help but I hope you can see why I am getting frustrated. The F&R switch looks good and the cables are all heavy duty. Is there an easy way to test the F&R switch with a volt meter? I really appreciate your help.
|
![]() |
![]() |
![]() |
#13 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 72,380
|
![]() Continuity test for F&R attached. But a visual and physical test may still be needed even if your "HD" F&R passes a continuity test.
If contact is compromised pitting and burning of the contacts is seen. This heat causes the stationary contacts to sink in the housing further reducing contact. |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
95 medalist problem | Electric EZGO | |||
95 medalist steering problem | Electric EZGO | |||
96 ezgo medalist brake problem? | Electric EZGO | |||
Steering problem EZGO Medalist | Electric EZGO | |||
94 medalist electric problem | Electric EZGO |