lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.

Post New Thread  Reply
Thread Tools Display Modes
Old 11-07-2022, 12:27 PM   #31
Not Yet Wild
Join Date: May 2021
Posts: 6
Default Re: EZ-GO 2008 RXV openCAN not sending info

Originally Posted by apro2929 View Post
Hello, I have a 2008 EZ-GO RXV golf car , ACD 4805 controller by Danaher.
I'm trying to access the CANbus through a CAN adapter called
Canalyst 2 and obtain information from the CANopen protocol such as speed and etc.
When I connect the adapter and follow the instructions and set the correct baud rate (250k) I only get one message upon switching the car to ON:
Is there a required step to be done or something to be sent to the car in order to start receiving information from the CAN ?

Were you finally able to connect to the can and read the values?

madius is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

canalyst2, canbus, canopen, canprotocol, ezgo
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO

Thread Tools
Display Modes

Similar Threads
Thread Forum
Sending unit Gas Club Car
2008 ezgo 2+2 swap info Big Block Talk!
Oil sending unit wire Gas EZGO
Sending it to PQ Electric Club Car

All times are GMT -5. The time now is 04:35 AM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of © 2006-2017 All rights reserved.