12v pigtail sufficiently powered?

[Broadwater]

I have a 2022 EZGO Express S4 72v. It has a 12v pigtail and a 12v negative female blade lead coming off the wiring harness.

I was getting ready to install a 72 to 12v reducer, but can anyone tell me whether this 12v pigtail is sufficient for powering my light bar (x2) and a large sound bar? If it'll push those items without blowing a fuse, it would save me from installing the reducer, but I can't find any specs on what those outputs will support (watts/amps).

I've attached a photo of the pigtails and my battery pack.

Thanks all.

[radioman]

You need to know the power requirements of all devices to make a decision. Assuming this is a 72 volt pigtail intended for a 12 volt reducer connection a current requirement for 100 watts at 72 volts would be about 1.38 amps. Once converted to 12 volts the current requirement for 100 watts of the 12 volt output would be 8.3 amps.

[Broadwater]

That's helpful, radioman. Thank you for your input. I think based on my small LED light bars and the single sound bar, I'm going to be fine. Thanks again!