|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-23-2010, 07:47 PM | #1 |
Gone Wild
Join Date: Dec 2009
Location: Waihee, Maui, Hawaii
Posts: 262
|
What are resistor mounting boards made of ?
I was in the process of changing the wires and contacts on my 88 resistor cart. As murphy would have it, I ended up cracking/bracking the mounting board that the resistor coil is attached to. I was hoping I could just run down to the auto store and buy a blank board and drill the mounting holes out of it. Other wise I gotta get it shipped in from the mainland. anyone know what the boards are made of ? also any trick to getting the contacts off. I can't seem to keep them from spinning or get some pliers in there to hold them while I get the nut loose. So far all I have been able to do is cut my hand, and get a little shock
thanks all joe |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-23-2010, 07:49 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: What are resistor mounting boards made of ?
I believe they are made of PHENOLIC
|
02-23-2010, 07:54 PM | #3 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: What are resistor mounting boards made of ?
You're better off getting a complete board assembly...
|
|
|
02-24-2010, 12:55 AM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Waihee, Maui, Hawaii
Posts: 262
|
Re: What are resistor mounting boards made of ?
Thanks Roady89 and yea Mike, you are probably right. Did a quick look around town tonight and no luck on the board. Will try again tomorrow at a few other spots, if I strike out again will just have to order it.
thanks again guys. Its a little frustrating, I know I have seen the material before and my dad used to have this stuff lying around his electronic shop all the time. oh well aloha joe |
02-24-2010, 07:09 AM | #5 |
Gone Wild
Join Date: Aug 2009
Location: Wilton,NC
Posts: 172
|
Re: What are resistor mounting boards made of ?
Some carburetor spacers are made of phenolic resin. I used to run them on on my race cars because they don 't transfer heat like aluminum. You can check local auto parts stores. They will be thicker but you can cut them down if needed.
|
02-24-2010, 07:12 AM | #6 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: What are resistor mounting boards made of ?
|
02-24-2010, 08:06 AM | #7 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: What are resistor mounting boards made of ?
Quote:
This is what you need right, I don't know if he still has it but you can PM him, good luck------Page #1--post #2 there's a pic http://www.buggiesgonewild.com/golf-...zgo-parts.html * * * * * * |
|
02-24-2010, 12:05 PM | #8 |
What was I thinking?
Join Date: Jul 2009
Location: Brooksville, Florida
Posts: 577
|
Re: What are resistor mounting boards made of ?
Nope, I got it for my busted up coil pack.
|
02-24-2010, 12:35 PM | #9 |
Gone Wild
Join Date: Dec 2009
Location: Gastonia NC
Posts: 530
|
Re: What are resistor mounting boards made of ?
look on the bay thats were i got it last...to make a keyer for my radio (amateur radio )
|
02-24-2010, 05:22 PM | #10 |
Not Yet Wild
Join Date: Dec 2009
Posts: 48
|
Re: What are resistor mounting boards made of ?
Is there any other type of insulation board that can replace that? Something that can purchase at like homedpot?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
burning up resistor boards | Electric Club Car | |||
Powerwise Charger circuit boards | Electric EZGO | |||
Quick Charge Input Boards | Electric EZGO | |||
Usable step/running boards | Electric Club Car |