|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-23-2012, 06:04 AM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 1
|
1995 Accelerator works backwards
replaced curtis 1205 117 controler and now when I depress the accelerator, at first I get full throttle, then as I push petal to the floor, the cart slows as if the throttle is working in reverse order
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2012, 08:37 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1995 Accelerator works backwards
Welcome to BGW!
The standard throttle input to a Curtis 1205 controller is 0-5K, but there are ones with optional 5K-0 input. Sounds like you might have gotten one of the latter from your vendor. Pull the throttle input wires off the controller an measure resistance between them with an Ohmmeter. Should be less than 300 ohms with pedal up and 4,500 Ohms or more with pedal on floor, but less than 7,000 Ohms. If your potbox (throttle) is working as described above, you need to contact your vendor to get a controller with correct throttle setup. Or you could rewire the potentiometer in your potbox to give you a 5K-0 output. |
|
|
Similar Threads | ||||
Thread | Forum | |||
backwards? | Lifted Golf Carts | |||
Accelerator Pedal works halfway down | Electric Club Car | |||
Club Car Accelerator seems backwards | Electric Club Car | |||
throttle problem,new controller,throttle works backwards | Electric EZGO | |||
ez go f/r backwards | Electric EZGO |