Can't Adjust Camber on GTW lift kit

baggerider · 09-01-2018, 09:39 PM

I just installed a GTW 6" A Arm lift kit on my 2014 Precedent. I cannot get the camber to where it should be, I have adjusted the Bottom Heim joint on the spindle out as far as I can go, only a few threads left to put the lock washer and nut on. Any suggestions?

hunter99 · 09-02-2018, 03:12 PM

Sorry I can't be of much help. All I can say is it took me a while to get it set on my RHOX Kit.

Is the arm short and the threads behind the heim joint not long enough? Are the spindles visually mostly straight up and down. Do the arms on the top seem long. Just trying to think of any anything I would start to look at.

Htownblue · 09-02-2018, 07:44 PM

Adjust the upper bolts and lower helm bolts in conjunction. After each adjustment, roll the cart forward and backwards about 20 feet.
You have to adjust the upper and lower bolts to find the sweet spot. And you need to jack it up each time to adjust. Tedious. But it can be done.

baggerider · 09-03-2018, 05:30 PM

Thanks for the Suggestions, I will give it a try Again ..

09-01-2018, 09:39 PM	#1
baggerider Not Yet Wild Join Date: Aug 2018 Location: Millsboro Delaware Posts: 4	Can't Adjust Camber on GTW lift kit I just installed a GTW 6" A Arm lift kit on my 2014 Precedent. I cannot get the camber to where it should be, I have adjusted the Bottom Heim joint on the spindle out as far as I can go, only a few threads left to put the lock washer and nut on. Any suggestions?

09-02-2018, 03:12 PM	#2
hunter99 Gone Wild Join Date: May 2016 Location: Raleigh, NC Posts: 194	Re: Can't Adjust Camber on GTW lift kit Sorry I can't be of much help. All I can say is it took me a while to get it set on my RHOX Kit. Is the arm short and the threads behind the heim joint not long enough? Are the spindles visually mostly straight up and down. Do the arms on the top seem long. Just trying to think of any anything I would start to look at.

09-02-2018, 07:44 PM	#3
Htownblue Gone Wild Join Date: May 2015 Location: Houston Posts: 903	Re: Can't Adjust Camber on GTW lift kit Adjust the upper bolts and lower helm bolts in conjunction. After each adjustment, roll the cart forward and backwards about 20 feet. You have to adjust the upper and lower bolts to find the sweet spot. And you need to jack it up each time to adjust. Tedious. But it can be done.

09-03-2018, 05:30 PM	#4
baggerider Not Yet Wild Join Date: Aug 2018 Location: Millsboro Delaware Posts: 4	Re: Can't Adjust Camber on GTW lift kit Thanks for the Suggestions, I will give it a try Again ..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Adjust camber on standard G9?	Gas Yamaha
Camber adjust on super sport 6" all sports lift??	Electric Club Car
Camber adjust question	Lifted Golf Carts
installed lift, now to adjust the camber	Gas Club Car
how to adjust camber?	Gas Yamaha