Anyone Sell A Street Light Kit that fits OEM cutouts for 2004 DS?

[noserider]

I would like to upgrade my factory DS lights to include led headlights with brake lights and turn signals. Cart came with lights which I'm told are OEM size so need to find a light kit to upgrade that fits existing cutouts. existing holes. Anyone done this and know where a kit is available?

[Fairtax4me]

I think the only thing you can do with the factory lights is put LED bulbs in them.
The general way to tell if the lights are factory or aftermarket add-ons is the mounting hardware. If they have 4 mounting screws through the front of the housing, One in each corner, they are aftermarket lights.
The factory lights have hidden mounting hardware behind the body panel, there are no exposed screws.

If there is any doubt you can post a picture of Your lights and we can usually tell.

[noserider]

Originally Posted by Fairtax4me

I think the only thing you can do with the factory lights is put LED bulbs in them.
The general way to tell if the lights are factory or aftermarket add-ons is the mounting hardware. If they have 4 mounting screws through the front of the housing, One in each corner, they are aftermarket lights.
The factory lights have hidden mounting hardware behind the body panel, there are no exposed screws.

If there is any doubt you can post a picture of Your lights and we can usually tell.

Headlight have 2 screws.

[noserider]

Originally Posted by noserider

Headlight have 2 screws.

Does anyone know if these look factory size? I would like to add a street light kit with blinkers and brake lights in Led.

[Fairtax4me]

Those look like factory lights to me. There is another option, but you may need to do some modification or custom brackets to make it work. If you measure those lamps the lamp housing should be about 4x6" which is the same as a 4x6" sealed beam car headlamp.
You may be able to fit the new LED type 4x6 hedlamps in there. You would probably need to upgrade the wiring, and use a relay because of the higher current draw from those type of lights, but it seems like that might be doable if you can find a way to mount them.

[noserider]

Originally Posted by Fairtax4me

Those look like factory lights to me. There is another option, but you may need to do some modification or custom brackets to make it work. If you measure those lamps the lamp housing should be about 4x6" which is the same as a 4x6" sealed beam car headlamp.
You may be able to fit the new LED type 4x6 hedlamps in there. You would probably need to upgrade the wiring, and use a relay because of the higher current draw from those type of lights, but it seems like that might be doable if you can find a way to mount them.

Thanks for the reply. TahoeDawgZ71 said someone was coming out with Led's that fit the factory size. I really need the blinkers and brake lights more than anything else. Cart is used in my neighborhood everyday and I'm tired of hand signals.

[noserider]

Double post deleted.

[Out2Sea]

As I understand it, Red Hawk fits OEM. You might want to start researching there.

[noserider]

Originally Posted by Out2Sea

As I understand it, Red Hawk fits OEM. You might want to start researching there.

Thanks. I'll check that out.

[TahoeDawgZ71]

Originally Posted by noserider

Thanks. I'll check that out.

RedHawk is the vendor I was telling you about. They're coming out with an OEM style LED headlight for the DS some time this summer. I just checked stock status and it's still showing zero.