04-11-2020, 10:59 AM | #1 |
Not Yet Wild
Join Date: Dec 2018
Location: LA=lower Alabama
Posts: 2
|
No reverse
I have a 93 club car that I upgraded to Scottyb’s C54 kit and a HD reversing contractor and upgraded to 48 volt at same time. 3 days ago reverse quit working. The solenoid is engaging and the reverse contractor is actuating. Checked all wires and connections, tightened everything. Nothing obvious. Any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-17-2020, 08:40 PM | #2 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: No reverse
With the rear of the cart jacked up, I would verify the function of both solenoids (main and reversing contractor) with an ohmmeter. You should have continuity across the big posts of each solenoid when you engage reverse.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
F/r switch help. Reverse buzzer is on in forward and not on reverse | Electric EZGO | |||
1981 Harley 3 wheel D model reverse issue/won't reverse | Gas Harley Davidson | |||
Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO |