|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
11-19-2020, 03:46 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2009
Location: Blanco, Texas
Posts: 7
|
Tail Light Install
Hello! I'm upgrading the tail lights on a 2015 Precedent to LEDs and the new lights have a couple screw tabs on them which I would like to use. The old lights were just held on with tape, so I will need to drill two holes on each side, one into the body and another into the bumper. I'm not sure about the holes into the body. Can I just use a regular drill bit for that? Also not sure what type of screws would be best? If anyone could provide some help with this it would be greatly appreciated. Thanks!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-19-2020, 03:54 PM
|
#2 |
|
Gone Wild
Join Date: Jul 2020
Location: South Louisiana
Posts: 246
|
Re: Tail Light Install
Yes a standard drill bit can be used. All of the taillights ive installed came with a black phillips screws.
Something like this...  Wayne |
|
|
|
|
11-19-2020, 04:13 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2009
Location: Blanco, Texas
Posts: 7
|
Re: Tail Light Install
Got it -thanks for the reply!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZGO Marathon head light/tail light wiring trouble | Electric EZGO | |||
| Is a voltage reducer required to install tail Light Kits | Electric Club Car | |||
| club car head light and tail light wiring | Electric Club Car | |||
| Precedent Light Kit Installation – Tail Light Question | Electric Club Car | |||
| G-14 Premium Headlight/Tail light Install with Pics | Gas Yamaha | |||
Linear Mode
