|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-23-2011, 07:01 PM | #1 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
solinoid qustion
with the key on and the cart in F i tested my solinoid and got 19.6 v without touching the gas pedal when i pressed it all the way down i got 0.0 V and the cart was spinning the wheels (it was on blocks )
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2011, 07:07 PM | #2 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: solinoid qustion
That's not really the way I would test the solenoid but if you were measuring across the small posts, your measurement is correct.
|
05-23-2011, 07:45 PM | #3 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: solinoid qustion
Got that # on the large lugs
|
05-23-2011, 07:46 PM | #4 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: solinoid qustion
Resistor maybe
|
05-23-2011, 08:39 PM | #5 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: solinoid qustion
1) To measure the voltage on your solenoid measure from the negative on your battery pack to the large lug on the solenoid that is connected to the positive post on the battery pack, it should read pack voltage (38.2v).
2) Then measure the voltage from the negative on your battery pack to the other large lug on the solenoid that is connected to the controller, it should read a few volts less than pack voltage. 3) Turn on the key and depress the throttle until the solenoid clicks and the post that runs to the controller should now be pack voltage. |
05-23-2011, 09:02 PM | #6 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: solinoid qustion
I did that already And I'm still getting 21.2 volts with the switch off on the controller side. the solenoid is new.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
fitted new solinoid still not working | Gas EZGO | |||
shot solinoid????? | Electric EZGO | |||
18 Horse Kohler qustion | Big Block Talk! | |||
how do I test f-n-r & solinoid | Electric EZGO | |||
Is this a solinoid problem? | Electric EZGO |