|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-10-2017, 10:47 AM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
2004 ez go pds no click
Hi I it a ez go pds that I can't get the solenoid to click, there is power to reed switch, it has ground at blue wire on solenoid, but no power on the yellow wire,on the key switch it measures 37 v only when you put positive lead on battery pack positive and the black lead to the white wires of the key switch idk if that's normal or not, also the reed switch seems that is has been bypassed so it's just a red wire connected to the plug.to be sure I'm testing the yellow wire right I'm putting - lead to the battery pack negative and positive to the yellow wire and I get 198 mv , which is nothing lol , any help appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-10-2017, 10:56 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2004 ez go pds no click
You must have power to the red wire after the reed switch. Try this reed switch bypass.
If it works beware the cart will run when charging ! Run the charge cord through the steering wheel before plugging in to avoid accidental driving with charger plugged in. |
07-10-2017, 11:47 AM | #3 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: 2004 ez go pds no click
It is already like that, there is no reed switch and there is a red wire connected to the screw then connects to the red wire going to controller
|
07-10-2017, 11:48 AM | #4 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2004 ez go pds no click
Quote:
Check for full battery pack voltage (38.2V when fully charged) on J1 Pins 4 and 5. Voltage to Pin-4 comes from reed switch or other source if bypassed. Pin-4 supplies B+ to controller electronics. Voltage to Pin-5 comes from the battery side large terminal on solenoid and goes through a "Sonic" weld in wiring harness. Pin-5 supplies B+ to external switches (Key, Pedal & F/R) and solenoid coil. -------- To get solenoid to click, you have to have B+ on all wires highlighted in red and attached schematic. |
|
07-10-2017, 01:26 PM | #5 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: 2004 ez go pds no click
Yes I'm getting full voltage at 4 and 5
|
07-11-2017, 08:52 AM | #6 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2004 ez go pds no click
|
07-11-2017, 09:34 AM | #7 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: 2004 ez go pds no click
#1,3,7,8,9 showed no voltage, 4 and 5 are the only ones
|
07-11-2017, 09:51 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2004 ez go pds no click
There is power coming in and nothing going out. The controller is dead. Replace with Alltrax XCT48400 and SW180 HD solenoid for best results.
|
07-11-2017, 09:55 AM | #9 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: 2004 ez go pds no click
Okay thanks, I'll get one ordered
|
07-11-2017, 01:12 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2004 ez go pds no click
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2004 PDS - solenoid won't click, won't run | Electric EZGO | |||
2004 cc precedent iq no solenoid click | Electric Club Car | |||
2004 TXT has a solenoid click but cart doesn't move.. | Electric EZGO | |||
2004 Club Car Precedent no solenoid click | Electric Club Car | |||
2004 Ez Go click when you hit gas pedal | Electric EZGO |