48v motor and controller for sell w/6" lift

[redtide361]

am selling my 48v motor. Curtis controller, 6inch drop axle lift including the solenoid and all motor leads, battery leads and solenoid leads. All with tinned copper lugs marine grade tinned copper 4awg wires on all wires

[redtide361]

All parts have not been cleaned before pictures. I removed them from a ezgo 48v mpt 1000. Every worked really good and fast. Only selling because I did a 600a ac conversion from Navitas.

[GradyTX]

What is the price? Seriously looking for new, but would consider if too nice to pass up...albeit I think mine is a series and so not sure if compatible without conversion. Sorry, not near as knowledgeable as you are on these heh.

may I ask, how much was it to upgrade to AC?

[redtide361]

7oo bucks buys it all. It all works perfectly. Price is firm and cheap

[GradyTX]

Originally Posted by redtide361

7oo bucks buys it all. It all works perfectly. Price is firm and cheap

Thanks, I think I will stick with new, but I appreciate it. Having fun building it from the ground up, literally heh. Good luck with the sale!

R

[redtide361]

Started the install. Very rough atm will post when completed

[redtide361]

Started the SBD navitas 600a ac conversion build! 1ST by cutting my weird mounting plate with 3 feet that came with it...... I cut them off and mounted on to stock controller bracket. Very rough install atm haven't completed the wire lay out but will create a nice pig tail. I'll post finished project its a ezgo MPT 1000.
The speakers i made fit under the cup holder for stealth. I used rubber hose and epoxy to route cup holder drain kind of like a cars ac. Wraped in dynomat and the front cowling as well. All new head lights, tail lights, marker lights, ignition switch and wiring harness.(found a original ezgo MPT kit on eBay never opened) didn't need it but I was going too hard not to. BTW facebook junior game warden officers these signs i made into battery protection plates is off of our property which we pay Texas to be a member of, meaning I own it.

[GradyTX]

Originally Posted by redtide361

Started the SBD navitas 600a ac conversion build! 1ST by cutting my weird mounting plate with 3 feet that came with it...... I cut them off and mounted on to stock controller bracket. Very rough install atm haven't completed the wire lay out but will create a nice pig tail. I'll post finished project its a ezgo MPT 1000.
The speakers i made fit under the cup holder for stealth. I used rubber hose and epoxy to route cup holder drain kind of like a cars ac. Wraped in dynomat and the front cowling as well. All new head lights, tail lights, marker lights, ignition switch and wiring harness.(found a original ezgo MPT kit on eBay never opened) didn't need it but I was going too hard not to. BTW facebook junior game warden officers these signs i made into battery protection plates is off of our property which we pay Texas to be a member of, meaning I own it.

Nice. I like Dewey County. I have a ranch in Edwards County.