|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-12-2009, 11:31 AM | #21 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2009, 06:44 PM | #22 | |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Quote:
|
|
01-12-2009, 06:52 PM | #23 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
so everyone that did or is thinking of doing a body swap on your g1, what kind you use, or better yet pics pics pics
|
01-12-2009, 07:58 PM | #24 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Quote:
|
|
01-12-2009, 08:05 PM | #25 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Guy's.....Do know the look you want? Just see it in your minds eye, strip the body parts off and fab frame work to mount the body parts. I know YOU can do it. Heck I once put Harley DE40 front and rear bodies on a G16-A. Yes there was some body work involved also, but...... Later Dave
|
01-15-2009, 10:09 PM | #26 |
Not Yet Wild
Join Date: Nov 2008
Posts: 3
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Sorry so long getting back. I do not have any pics of the front fender, but I can say that I lifted the front 6.75" and moved forward 2". The rear was lifted around 6.25". I have 22-10-10 tires and had to trim a small amount from the rocker. I got lucky on the result, as I am very pleased. Next will be seeing what I can get from the engine without affecting low speed cruising. Thanks everyone!
|
02-14-2009, 02:20 AM | #27 |
Not Yet Wild
Join Date: Dec 2008
Location: central, MI
Posts: 54
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Ok well I am getting all my ducks in a row for this G1 build, I have a spare parts cart I just purchased and gonna start doing some swapping and building. I will have plenty of pictures to post soon. I am thinking about going with a 6" lift with 22's. I was told that will create a taller gearing which makes sense, I am not overly worried about top speed which I will gain but does it make these carts gutless down low with these tires to do they still pull themselves just fine? Also any hints on where to go to get nice tire and wheel set ups for cheap.
|
02-14-2009, 10:41 AM | #28 |
Gone Wild
Join Date: Aug 2007
Location: North Texas
Posts: 2,312
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Welcome to the forum. I have a Harley and am looking for a G1 to build. I like the 2 cycles for they are somewhat easier to work on. I have also built a few G9's. PM me if you need any service manual's.
|
02-15-2009, 11:38 AM | #29 |
Gone Wild
Join Date: Jan 2009
Location: Meridian,MS
Posts: 183
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Trevor, here are some pics of mine. These G1's are fun. Adjusted gov and it runs near 25 mph.
|
10-14-2009, 09:40 AM | #30 |
Gone Wild
Join Date: Jul 2009
Location: Sand Springs,Ok
Posts: 873
|
Re: New owner of G1 looking to recreate!!! Any input??? please?
Welcome to the forum!!!G1s are great..
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Input Shaft question | Electric EZGO | |||
anyone heard of snapping input shafts? | Big Block Talk! | |||
picking up an older gas cart saturday... need input | Gas golf carts | |||
input on lift and tires I have chose.... | Gas Club Car | |||
Starting input needed | Gas EZGO |