Precedent XCT500, MZJ400A Install - Solenoid activation issues

[WalterM6]

Current cart setting is 'high/low'

Change it to the other setting and see if the charging button goes off. Don't forget to hit the set button before exiting menus or the changes won't be saved.

[davejax904]

Originally Posted by Sergio

I am sorry, my answer was confusing.

The ERIC system will never be in a "Floating/NC" state since it has a pull-up resistor keeping the user3 line high.

The correct option without changes is "Floating/NC" so it runs all the time, with or without the charger plugged to the cart.

If You remove the 10kΩ resistor, then changing the option to "High/Low" will allow the cart to be disabled when the charger is plugged to the cart.

Winner. Winner. Wheels are now turning after changing that setting.
F is reverse, and R is forward, so i'll need to swap F1 and F2.

Thanks for all the help!