|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-03-2009, 09:38 PM | #1 |
Not Yet Wild
Join Date: Dec 2008
Location: central, MI
Posts: 54
|
G1 pulling power???
I am curious as to what kind of weight my stock G1 could pull it will soon b also turning at least 20" tires (maybe bigger, any tire/lift combos to suggest???) I see guys pull race cars down the strip with ease, how about a couple jet skis on a trailer?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-03-2009, 10:28 PM | #2 |
Not Yet Wild
Join Date: Dec 2008
Posts: 15
|
Re: G1 pulling power???
Should pull them down the road ok, but remember the brakes are not the greatest. I doubt if you could get them out of the water with it.
|
02-04-2009, 08:00 AM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G1 pulling power???
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-04-2009, 10:53 AM | #4 |
Not Yet Wild
Join Date: Jan 2009
Location: tallahassee,fla.
Posts: 62
|
Re: G1 pulling power???
i just put a 6 in. jakes lift with 22 in tires on my g-1 worked great
|
02-04-2009, 02:21 PM | #5 |
Not Yet Wild
Join Date: Dec 2008
Location: central, MI
Posts: 54
|
Re: G1 pulling power???
OK well that helps I was just curious. 6" with 22's is what I was looking into, I was originally thinking 4" with 20's, this will be for looks more than function so I thought that may look a little small. A 6" is only done with new a-arms or can that be done with drop brackets?
|
02-04-2009, 02:54 PM | #6 |
Getting Wild
Join Date: Jul 2008
Location: Corona, CA
Posts: 89
|
Re: G1 pulling power???
Ive pulled two stand up's with my G2 if that helps.pulled it like nothin was behind it.brakes are an issue though for sure.
|
02-04-2009, 10:09 PM | #7 |
Gone Wild
Join Date: Jan 2009
Location: Meridian,MS
Posts: 183
|
Re: G1 pulling power???
Put 6" Jakes and 20' tires on mine. Works just fine!!!
|
02-04-2009, 10:15 PM | #8 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G1 pulling power???
Looks good FFP
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-05-2009, 08:13 AM | #9 |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: G1 pulling power???
I pulled 2 jet skis launched and retrieved them with no issues for a couple years with my G1 gas. The brakes are definately something you have to be aware of. I do use a relatively shallow launch.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How about pulling the driven clutch to install a shorter belt? | Gas EZGO | |||
Pulling the body for paint | Ezgo Gas Tech | |||
Pulling weight | Gas Yamaha | |||
not pulling gas and engine stumbles | Gas Yamaha |