|
Restoration Early 70's and older restoration projects |
|
Thread Tools | Display Modes |
01-12-2021, 10:39 PM | #1 |
Not Yet Wild
Join Date: Jan 2021
Posts: 10
|
Turf Rider IV Disassembly Question
Turf Rider IV Disassembly Question --- Has anyone had any luck on getting the "rusted-in-tube" for the seat back support out of the frame tube and the rusted-in-tube" for the Golf Club/Canopy support out of the frame tube. If you are not familiar with this situation a "tube", about 6 inches long, was inserted into a "tube" that was welded to the frame to support the "assembly" above and yes water dripped into the "space" in between the two tubes. I would love to apply some heat but all the conditions are within inches of the 50 plus year old fiberglass body. I have been trying to soak with PB Blaster but still no luck (not sure how far down the PB Blaster soaks down).
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Turf Rider IV- What year might this car be? | Drivers Clubs | |||
Yep another Turf rider restoration | Restoration | |||
another Turf Rider IV project | Restoration |