lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!
Big Block Talk! Everything about swapping a big block engine into your cart!



Post New Thread  Closed Thread
 
Thread Tools Display Modes
Old 02-04-2008, 10:37 PM   #1
shawn.m
Gone Wild
 
shawn.m's Avatar
 
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,893
Default New source of V-Twin performance parts!

I was reading on the Heymow.com forum about a competitor to Al Hodge at http://www.performancevtwins.com/

It is http://www.eccarburetors.com/
When I talked to one of the counter guys this morning. He gave me a recipe to get 50hp plus out of the 18-20hp briggs. of course your talking almost $3k on top of your $1 motor.

Low buck $410 I am already halfway there! - just need the cam and thin head gaskets
16hp heads $75
Thin head gaskets $40
Precision cam $175
Rev kit $75
K&N air filter $35
Rejet carb $10 for jets


mid buck build maybe 40hp $1500
ARC billet aluminum flywheel for starters. $320 http://www.arcracing.com/cgi-bin/Sof...exe/?E+scstore
Starter to go with flywheel $175
Precision Camshaft cost about $175
Modified carb $175 up from EC Distributing
Air cleaner & adapter $150
Roller rockers $300 - if you have the good aluminum rockers you wont need these.
Port & polish heads $150
ARC rods $220 http://www.arcracing.com/cgi-bin/Sof...exe/?E+scstore
Thinner head gaskets $35

Also a interesting point was to bolt 16hp heads on a 18-20hp motor to pick up some compression

High end build 60hp build! will run at 7000 rpm at the race track!
$3000
Cam 1200 Precision
Longer than stock Rods 229.00 ARC or 225.00 E.C.
Using the longer rods you cut the stock pistons 100 thousands creating flat tops and more compression. 30.00 new rings E.C. 29.00 a set.
Now outside several options. 16hp heads again smaller chamber and more compression
new unported E.C. 150.00 ea. ported and all the works, springs and retainers 300.00 ea.
Used I have several sets stock 75.00 ea.
ported and all my magic touch including dual springs and billet retainers 200.00 each
Billet flywheel 345.00 E.C.
High torque Starter 160 E.C.
two steel push rods to replace aluminum E.C. 4.50 ea.
have that carb built to the hilt to run that beast could run as high as 700.00 depending on level of build.
K&N Airfilter E.C. 42.95
Air filter adapter 39.95
Roller rockers Performance V-twin 325.00 Thats all I would recommend you buy there.
K&N filter for crank case breather 12.95
Gasket set to include very thin aluminum gaskets (more compression) E.C. 48.00
shawn.m is offline  
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-05-2008, 12:05 AM   #2
shawn.m
Gone Wild
 
shawn.m's Avatar
 
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,893
Default Re: New source of V-Twin performance parts!

oh yeah custom cam grinds
http://www.precisioncams.com/
shawn.m is offline  
Old 02-06-2008, 08:42 AM   #3
todwil
TOD WILD
 
todwil's Avatar
 
Join Date: Nov 2007
Location: YUMA AZ
Posts: 666
Default Re: New source of V-Twin performance parts!

Yea Performance V-Twins is where I get my stuff they even make parts
for the bigger blocks 31hp-35hp vanguards!!!!
todwil is offline  
Closed Thread
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!


Thread Tools
Display Modes


Similar Threads
Thread Forum
12 volts source Big Block Talk!
Kohler command v-twin engine parts. Golf Cart Parts
Carts Parts Plus: Oversize Jets/Performance Parts Golf Cart Parts
V-Twin Performance Golf Cart Parts
Plowmans High Performance Engines/Parts Golf Cart Parts


All times are GMT -5. The time now is 06:39 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.