lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-18-2022, 04:56 PM   #1
Swamprat
Not Yet Wild
Columbia
 
Join Date: Jul 2021
Location: Nicholasville Kentucky
Posts: 48
Default need belt help

need help finding a belt to use. I can not use the belt calculator in the sticky because i cant download on work computer. I also dont have a belt to measure on the drive pulley to get outer diameter. All i do have is 7inch driven diameter, 14 1/2 in center to center. belt width is 1 in.
Swamprat is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-18-2022, 05:13 PM   #2
Swamprat
Not Yet Wild
Columbia
 
Join Date: Jul 2021
Location: Nicholasville Kentucky
Posts: 48
Default Re: need belt help

7/8 belt
Swamprat is offline   Reply With Quote
Old 06-18-2022, 08:13 PM   #3
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
Default Re: need belt help

Are you using a clone? What size engine?

If you need a 7/8" wide belt, that must be a really small clutch. Is it a Comet Torq A Verter? Typically those smaller clutches are for 5.5hp or 6.5hp engines. If you are running a larger 13-18 hp clone, you might have issues with the belt and clutches.
slonomo is offline   Reply With Quote
Old 06-20-2022, 10:27 AM   #4
Swamprat
Not Yet Wild
Columbia
 
Join Date: Jul 2021
Location: Nicholasville Kentucky
Posts: 48
Default Re: need belt help

420 predator with 40 series clutch
Swamprat is offline   Reply With Quote
Old 06-22-2022, 10:08 PM   #5
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
Default Re: need belt help

Here's what I found, a good match for the specs you gave

https://www.mfgsupply.com/213295a.html
slonomo is offline   Reply With Quote
Old 06-24-2022, 12:32 PM   #6
Swamprat
Not Yet Wild
Columbia
 
Join Date: Jul 2021
Location: Nicholasville Kentucky
Posts: 48
Default Re: need belt help

Thanks, I did find one and think it's about same length. O dont have the gear box mounted so when I do I'll set the distance. Just temp mock up now
Swamprat is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps




Similar Threads
Thread Forum
1997 ezgo belt size/smaller belt for more torque Gas EZGO
G29 starter belt - any reason not to use a standard v-belt? Gas Yamaha
replacing alternator/starter belt with shorter belt Gas Club Car
How do I change the drive belt and altenator belt? Gas Club Car
'92 carryall with new engine, belt slips even with new belt and motor set far forward Gas Club Car


All times are GMT -5. The time now is 04:05 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.