|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
09-30-2022, 06:32 AM
|
#1 |
|
Getting Wild
Join Date: May 2009
Location: CT
Posts: 125
|
IQ Plus - No power from brown wire coming from FNR
So the cart is now running in reverse.
Per my programmer, I’m not getting any signal from the forward switch. The reverse switch does have signal when in reverse. I swapped out to a new switch and it didn’t help. I also checked the continuity and all checked out from the connection at the switch to the 24 pin connector on the controller. What am I missing here? Thanks, Ray Last edited by RJM; 09-30-2022 at 08:39 AM.. Reason: Issue solved, working on another |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-30-2022, 09:10 AM
|
#2 |
|
Getting Wild
Join Date: May 2009
Location: CT
Posts: 125
|
Re: Curtis Main Contactor Open Error
I just jumped the brown and orange wires at the fnr switch and still am not getting a forward signal at the controller. Continuity seemed fine so I am a bit stumped.
|
|
|
|
|
09-30-2022, 09:58 AM
|
#3 |
|
Getting Wild
Join Date: May 2009
Location: CT
Posts: 125
|
Re: Curtis Main Contactor Open Error
All set, seemed to be a loose connection at the 24 pin harness.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Curtis 1238- Main contactor issue | Electric Club Car | |||
| Main contactor remains open when closed | Electric EZGO | |||
| DCX 400 Issues - Open Field Error, LED Flashes Red 5 Times | Electric EZGO | |||
| Alltrax DCX open field error - jog my memory | Electric Club Car | |||
| New to me 96 DCS with Alltrax DCX 300 open field error | Electric EZGO | |||
Linear Mode
