Lights for Yamaha G9 Electric

[Mark@Spin]

I can't get hold of a light kit for a G9 Electric here in Australia, has anyone installed a light kit (headlights and brake lights) to one before. What are the catches and pitfalls? Does anyone have a wiring diagram and maybe some advise on going about it.

[trkbilder]

I went to the local truck shop and picked up some LED lights. Front turn signals, rear turn signals and park lights f&r. I'll look at it tomorrow and try to right down where the wires go, a home-made schematic. I have turn signals and I'm getting ready to use micro switches to do the brake lights. You can order turn signals off the web and they come with a wiring diagram.

[Mark@Spin]

Apparently you need a timer set up on the brakes otherwise when the park brake is engaged the brake lights will stay on and drain the battery.
I am not to concerned about turn signs, only head lights and brake lights.
I would appreciate the schematic. thanks.

[trkbilder]

Originally Posted by Mark@Spin

Apparently you need a timer set up on the brakes otherwise when the park brake is engaged the brake lights will stay on and drain the battery.
I am not to concerned about turn signs, only head lights and brake lights.
I would appreciate the schematic. thanks.

If you use one micro switch to turn them on, use the other to turn them off. Takes some moving the switches around to finally get it right but it does work. Look around the forum, I think there's a thread on how to do this.