![]() |
|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Jul 2009
Location: GA
Posts: 8
|
![]() Well the motor still gets real hot, I noticed one of the wire connetions was a little loose. I carefully tightened it and noticed it seems to spin, it will tighten but not all the way. Can this be replaced or am I looking at having to buy a new motor?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() We've never worked on a Star car, but I'm sure the motor is similar to other brands. Those lugs are connected to your brush contacts. They are not meant to "turn" or "spin". I don't think you need a new motor - but you will probably need to take it somewhere to check your motor / lugs...
Wasn't there a bottom nut close to the motor, then the wire lug and finally the top nut? |
|
|
![]() |
![]() |
![]() |
#3 |
just leave me alone
![]() ![]() Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
![]() So You hold the bottom steady and tighten the top
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() |
|
|
![]() |
![]() |
![]() |
#5 |
just leave me alone
![]() ![]() Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
![]() I knew, but everyone is not as smart (A55) as I
![]() |
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
![]() Join Date: Jul 2009
Location: GA
Posts: 8
|
![]() Thanks Fellas, The whole post turns, I tightened the bottom bolt but it still moves a bit side to side. Would this cause the motor to get smoking hot? I have put it in tow mode and come back an hour later and it is still smoking hot. I had to diconnect the Pos and Neg terminals that go to the controller to cool it down. Can the motor be taken apart and that post be replaced? There is a metal cover on one side that looks to be removable can the post be accessed from there, or do I need to remove the whole motor?
Thanks for being patient I am a newbe to the golf cart mechanics, but i am mechanically inclined. Just trying to get informed before I start turning wrenches an tearing things up. |
![]() |
![]() |
![]() |
#7 |
just leave me alone
![]() ![]() Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
![]() Yes you can replace brushes so I would assume if you find a broken stud wire when you open it up ?
And you are a good solderer or can repair the old end then YES ? I would take it to a motor rebuild (alternator shop) have them check it and get estimate ! |
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
![]() Join Date: Jul 2009
Location: GA
Posts: 8
|
![]() Thanks Gary
This **** Star has been more problems, Thought I got a good deal at $2500, but needed batteries $660, head light bulbs, only can by at a Star dealer, a nasty shimie in the back, took the tires and drums off only to find the axle jumps in one spot, maybe a casting issue, countless hours of Fiddle Farting around with it Mirrors, seat squeeks. The only thing I like about it is the AHROOOga horn I installed, it scares the $hit even out of the dogs that cross in front of it. Should have bought another CC Thanks again |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Star golf Cart parts and info | Star and Fairplay | |||
Star Golf Carts, whats the word on them ? | Star and Fairplay | |||
Star golf cart | Electric golf carts | |||
Star Carts | Electric golf carts | |||
When you wish upon a star.... | Golf Carts and Parts |