lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles

Post New Thread  Reply
Thread Tools Display Modes
Old 01-17-2010, 08:57 PM   #1
Not Yet Wild
Join Date: Dec 2009
Location: st thomas ontario
Posts: 31
Default Well G1 was stripped.

But i never took no pics guys sorry. I got my fatherinlaw doin all the welding as thats what he did, and its going to a maximum 4 inch lift. But i was wondering the tie rods do i make them longer or shorter or do i turn them out to bring in my wheel toe? Do yous know what i mean. My wheels seem to be pointing left and right instead straight. But with the lift done ill post pictures. Im hoping to get the engine back this week i hope as well.
cudel is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Old 01-17-2010, 11:14 PM   #2
Gone Wild
Newbylee's Avatar
Join Date: Jun 2009
Location: Canada
Posts: 358
Default Re: Well G1 was stripped.

You should raise your pick-up point for the tie rods on your spindle 4" also to keep the same geometry as stock. the toe should be close,but you can adjust it by turning the ball joint in or out.
Newbylee is offline   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha

Thread Tools
Display Modes

Similar Threads
Thread Forum
89 EZGO 19 Spline Coupler Stripped. Help? Electric EZGO
Stripped Hubs Electric EZGO
Stripped out studs on FNR assemble Electric EZGO
Stripped splines on rear hub Electric Yamaha
Stripped golf cart axle Electric EZGO

All times are GMT -5. The time now is 01:52 AM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of 2006-2017 All rights reserved.