|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-08-2015, 06:49 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2014
Location: Sterling,Mi.48659
Posts: 5
|
Reed
I was wondering if the starting issue I been having is a Bad reed valve. I pulled and it has been out before me. Looks clean and tight against the housing. No daylight pokeing thru the Throat and intake.Just not pulsating enough to run..
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-10-2015, 09:19 PM
|
#2 |
|
Gone Wild
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
|
Re: Reed
I'd look at the crank seals next
|
|
|
|
|
06-11-2015, 06:35 PM
|
#3 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Reed
If shut it should be good. Crank seals are a common one, these carts are pretty old. Pistons can also break the skirt I've seen. This assumes you have reasonable compression, good clean carb, no intake leaks, good plug, etc.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| reed switch | Electric Club Car | |||
| Reed Valve | Gas Harley Davidson | |||
| Reed Valves | Gas EZGO | |||
| reed valve | Gas Yamaha | |||
| need a reed delay | Electric EZGO | |||
Linear Mode
