g-1 timing

kaublr · 09-20-2015, 07:37 PM

I am rebuilding a 1980 g1 engine anf there are no markings for timing in the
flywheel area. DSoes anyone know a good place to set the adjustment ring
to stsrt at a normal setting

cgtech · 09-21-2015, 12:16 AM

I always mark it before it is disassembled. Has yours already been moved? If not mark it now. If no marks were made, and it has been moved, the best bet is to look closely to the slots where the screws go to find the marks where the screws were tightened before.

09-20-2015, 07:37 PM	#1
kaublr Not Yet Wild Join Date: Aug 2008 Posts: 43	g-1 timing I am rebuilding a 1980 g1 engine anf there are no markings for timing in the flywheel area. DSoes anyone know a good place to set the adjustment ring to stsrt at a normal setting
kaublr Not Yet Wild Join Date: Aug 2008 Posts: 43

09-21-2015, 12:16 AM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: g-1 timing I always mark it before it is disassembled. Has yours already been moved? If not mark it now. If no marks were made, and it has been moved, the best bet is to look closely to the slots where the screws go to find the marks where the screws were tightened before.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Timing	Gas Columbia ParCar
Timing	Electric Club Car
timing	Electric EZGO
timing	Gas Yamaha
Timing a G1	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum