|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-24-2013, 08:07 PM | #1 |
Not Yet Wild
Join Date: Oct 2012
Location: California
Posts: 17
|
Installing a mechanical oil pressure gauge... need help!
I have a 1992 4 stroke marathon and am trying to install a mechanical oil pressure gauge. Where can I get an oil pressure reading?
How do I install the gauge? Any help is always appreciated. Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-25-2013, 06:14 PM | #2 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: Installing a mechanical oil pressure gauge... need help!
Pull the blower housing off, right below the coil there is an oil pressure switch, if not there will be a plug that you can tap into. The oil pressure switch generally has a white wire attached to it to operate an oil pressure light.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
3/16" x 10' Mechanical Shear | Garage and Workshop | |||
need help installing battery gauge | Electric Yamaha | |||
Oil pressure gauge for the twin Robins | Gas EZGO | |||
Oil pressure gauge on Vanny | Big Block Talk! | |||
installing battery life gauge | Electric EZGO |