04-14-2013, 07:22 AM | #1 |
Getting Wild
Join Date: Dec 2012
Location: East tn.
Posts: 86
|
mikuni 3v18
Does anyone know where I can find an air screw for the 3v18 carb? Thanks Ron
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-14-2013, 08:09 AM | #2 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: mikuni 3v18
Ron,
You can get a rebuild kit here, http://www.vintagegolfcartparts.com/...&cat=ezgo_fuel which includes the screw you need but at a cost. If you shop around you can find the complete BV 18 for around $100 and I came to the conclusion that this was a better option. Incidentally if you look at an air flow map for the carburetor you will see that the low speed bypass screw is itself bypassed the moment you open the carburetor butterfly. The purpose of that screw is to adjust the slow running speed at idle which you don't care about. You could try capping the hole temporarily with some tape and seeing if the engine runs acceptably without the screw. Dave |
04-14-2013, 10:04 AM | #3 |
Getting Wild
Join Date: Dec 2012
Location: East tn.
Posts: 86
|
Re: mikuni 3v18
Thanks Dave. I will plug it and see what happens. Ron
|
04-14-2013, 04:44 PM | #4 |
Getting Wild
Join Date: Dec 2012
Location: East tn.
Posts: 86
|
Re: mikuni 3v18
That worked. Thanks Dave
|
04-14-2013, 06:06 PM | #5 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: mikuni 3v18
The pleasure is all mine Ron, I'm glad that worked out for you.
Dave |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mikuni 38 on vanny 23 | Big Block Talk! | |||
Has anyone done a successful mikuni swap? | Big Block Talk! | |||
mikuni carb for big block | Golf Carts and Parts | |||
G1 mikuni carb | Gas Yamaha | |||
wtb mikuni carb | Golf Carts and Parts |