|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-18-2014, 09:14 PM | #1 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Rxv clear 26s?
Brought home an 09 rxv the other day. Thinking of a madjax a-arm or spindle lift to clear 26s. Anyone put 26s on one? I they seem to dwarf. 23s
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-19-2014, 10:36 PM | #2 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Re: Rxv clear 26s?
Anyone install the a arm kit from madjax? I'm curious to know if 25s might fit on that kit. I'm almost positive the spindles will clear them but I'm worried without the spindles pushing the wheels forward and out that they may not clear the a arm kits.
|
01-20-2014, 05:18 AM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Rxv clear 26s?
A member here has a RXV with a 6" spindle lift. He (and others I've red) says it's unstable at speed. He bought another RXV and is looking at the madjax lift. here's a link with installed pictures of the madjax install. It's for gas so the rear is different but front should be identical.
http://www.buggiesgonewild.com/gas-e...-question.html |
02-09-2014, 11:46 AM | #4 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Re: Rxv clear 26s?
The mystery has been solved....the answer is not without modifications.
|
02-09-2014, 11:48 AM | #5 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Re: Rxv clear 26s?
The lift
|
02-09-2014, 11:54 AM | #6 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Re: Rxv clear 26s?
Rubs in the rear on tires that actually measure 25." I think a little bit of it can be contributed to the puny springs in the rear. I did a little trimming and plan to extend the shackle another inch or so to eliminate any rubbing. If that doesn't work, I'll install had springs. If highly recomend this madjax a arm. It's worth every penny and was an easy install excluding one bolt that was 1/2 x 20 fine thread and wasn't machined right. Took me two hours to find anyone in town that had one. Thanks O'rileys. I'll post more pics when I adjust the camber and work on the rear lift. Oh...also got 28mph on a slight incline with just the larger wheels and 19.5mph controller program.
|
02-09-2014, 01:34 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Rxv clear 26s?
|
02-09-2014, 04:35 PM | #8 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
Re: Rxv clear 26s?
I was in town and had to go back out towards dean forest to meet up with mike for some parts. I bet ace would've had it. Home Depot, napa, and autozone were negatories.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alt Clear Coating | Body and Paint | |||
paint to clear | Body and Paint | |||
Clear Coating | Body and Paint | |||
Clear coat ???? | Design Center | |||
I would like to clear a few things up | Gas Yamaha |