03-11-2016, 01:54 PM | #9 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
re: OBC Bypass ~ Technnical Tips
If You are referring to the powerDrive Plus Regen2 model below:
http://www.buggiesgonewild.com/attac...s_-regen2-.jpgThat is the one that You need to connect a fuse between the white and Blue wires on the OBC circuit. Cut the White and Blue wires between the OBC and the 6-pin plug and add a fuse on those 2 wires on the harness side. If You can, just cut the fuse holder that is on the OBC red wire and use that fuse holder to connect the white and blue wires together. Just make sure all other unused pins are either removed from the OBC 6-pin connector as shown on the first posts, or put electrical tape on any cut wires to isolate them. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bypassing Controller | Electric Club Car | |||
Bypassing OBC | Electric Club Car | |||
bypassing obc | Electric Club Car | |||
Bypassing the solenoid | Electric Club Car | |||
Bypassing the OBC on Precedent? | Electric Club Car |