PB6 Wiring Help Needed

Smooser · 09-07-2020, 09:06 PM

Evening guys,

I'm redoing a cart with the alltrax sr series, sw202, f/r switch, and a PB6 0-5k throttle. I'm having trouble understanding the wiring after the forward reverse switch connecting to the PB6. First there are two diode symbols after the forward reverse switch. Am I supposed to wire in two diodes here. The second part of my issue is the PB6 has 3 wires (4 reduced to 3 at the weatherproof connector). Blue, Red, Black. The Blue/Black works the micro and the Red/Black works the throttle. The diagram shows four wires with one going back to the main solenoid. I have the Red/Black wired to the controller. Not sure how to hook up the blue.

Capture_LI.jpg

SW202 SR Series.JPG

09-07-2020, 09:06 PM	#1
Smooser Not Yet Wild Join Date: Feb 2020 Posts: 8	PB6 Wiring Help Needed Evening guys, I'm redoing a cart with the alltrax sr series, sw202, f/r switch, and a PB6 0-5k throttle. I'm having trouble understanding the wiring after the forward reverse switch connecting to the PB6. First there are two diode symbols after the forward reverse switch. Am I supposed to wire in two diodes here. The second part of my issue is the PB6 has 3 wires (4 reduced to 3 at the weatherproof connector). Blue, Red, Black. The Blue/Black works the micro and the Red/Black works the throttle. The diagram shows four wires with one going back to the main solenoid. I have the Red/Black wired to the controller. Not sure how to hook up the blue. Capture_LI.jpg SW202 SR Series.JPG
Smooser Not Yet Wild Join Date: Feb 2020 Posts: 8

Similar Threads
Thread	Forum
Newbie to wiring... help needed.	Electric Club Car
36V HD Wiring Help Needed	Harley Davidson
36v to 12v wiring help needed	Electric golf carts
LED Wiring, Inverter needed?	Electric EZGO
wiring guru needed	Electric Club Car