|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-24-2008, 08:38 PM | #11 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: 81 cc jumps out to full speed
Actually I have a 650 amp controller and wiring....just been lazy and haven`t installed it. I really bought it for my Sebring electric Commuta car. The old style mechanical solenoids burnt out and you can`t get them to replace them so I bought it for that car. Nice little car, I just lost interest in it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-24-2008, 08:42 PM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 81 cc jumps out to full speed
You just need a potentiometer to match that controller. What voltage is it? 650 amps is plenty big!
|
08-24-2008, 08:48 PM | #13 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: 81 cc jumps out to full speed
I have the pot and everything. Its supposed to take up to 72 volts. Bought it a couple years ago. I don`t even remember the name of it. I know my bad! !
|
08-24-2008, 08:53 PM | #14 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 81 cc jumps out to full speed
That a lot of amps for 72 volts! How low will it go?
|
08-24-2008, 09:45 PM | #15 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: 81 cc jumps out to full speed
Not sure how low it will go. They just said it was good for 48 to 72 volts. I told them what the application was for and its what I got. Now you`re gonna make me go look it up tomorrow aren`t ya!!. I don`t know if its stated on the controller or not. Heck I`ll have trouble finding the schematic for it. I may be backwards on this , but I think they said it was for a series wound motor and I would have to short between 2 of the motor terminals and use the controller to switch between forward and reverse. I`d have to find the papers I got with it to know exactly what I mean. The F-R switch is in the wiring. I know I have a lot of money tied up in it and its just sitting.
|
08-24-2008, 10:02 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 81 cc jumps out to full speed
Sounds like it is time to upgrade the CC - LOL
|
08-25-2008, 04:19 PM | #17 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 81 cc jumps out to full speed
if your gonna convert the cart to a controller cart make sure with a 650 amp controller you upgrade all cables, solenoids, F&R switch ...everything to heavy duty and one more thing you might have to upgrade the motor......check into it.........i know they recomend after approx 400 amp controller to upgrade motor.......................
|
08-25-2008, 06:22 PM | #18 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: 81 cc jumps out to full speed
With the controller I have, it does away with solenoids and the f/r switch I have already upgraded the wiring to 2 gauge. Motor I`ll probably fry before its over with, then we upgrade it. But for the moment I`ll stick with what I have and replace the solenoids with those I have in stock. I don`t do a full out run that often. For that I have another I`m working on.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
belt heigth on drive pulley while at full speed?? | Gas Club Car | |||
No Power On Full Thottle | Electric EZGO | |||
nice full track | Videos |