2000 PDS stock 8in rims Centered or off set?

lawnripper · 12-31-2016, 11:10 AM

Hi everyone! Long time Happy New Years! Wheel question... Are my stock 8in wheels off centered, centered??? Ordering a extra for spare want to make sure I get the right one. Thanks again!!

Johnny

orangeman6 · 12-31-2016, 12:04 PM

Maybe someone will have the exact spec but it has to do with where the wheel mounts to the hub. If that's the center of the wheel, then the offset is zero. If the mounting is towards the outside, it's positive. A negative offset has the "deep dish" look. Hope this helps a bit and apologies if it's something you already knew.

Here's a pretty good link if you want to measure it yourself.

http://www.wheelpros.com/page/offset-explained/9

Sir Nuke · 12-31-2016, 12:04 PM

Johnny......to give yourself the piece of mind of knowing without a doubt, do the following. Take a wheel off of your cart and measure the distance from the mounting flange to the bead of the wheel.....take this measurement from both sides. if the measurements are the same....the are centered, if not, you will know what you have.

if your carts wheels are STOCK EZ-GO wheels.....here is what you should need.

https://shop.ezgo.com/products/8%252...heel-Only.html

lawnripper · 01-02-2017, 12:40 PM

Thanks you guys for the reply and information! Very much appreciated! Happy New Years!!!

12-31-2016, 11:10 AM	#1
lawnripper “I don’t feel tardy” Join Date: Aug 2012 Location: Central America Posts: 257	2000 PDS stock 8in rims Centered or off set? Hi everyone! Long time Happy New Years! Wheel question... Are my stock 8in wheels off centered, centered??? Ordering a extra for spare want to make sure I get the right one. Thanks again!! Johnny

12-31-2016, 12:04 PM	#2
orangeman6 Gone Wild Join Date: Sep 2016 Location: Northern California Posts: 1,300	Re: 2000 PDS stock 8in rims Centered or off set? Maybe someone will have the exact spec but it has to do with where the wheel mounts to the hub. If that's the center of the wheel, then the offset is zero. If the mounting is towards the outside, it's positive. A negative offset has the "deep dish" look. Hope this helps a bit and apologies if it's something you already knew. Here's a pretty good link if you want to measure it yourself. http://www.wheelpros.com/page/offset-explained/9

12-31-2016, 12:04 PM	#3
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 17,998	Re: 2000 PDS stock 8in rims Centered or off set? Johnny......to give yourself the piece of mind of knowing without a doubt, do the following. Take a wheel off of your cart and measure the distance from the mounting flange to the bead of the wheel.....take this measurement from both sides. if the measurements are the same....the are centered, if not, you will know what you have. if your carts wheels are STOCK EZ-GO wheels.....here is what you should need. https://shop.ezgo.com/products/8%252...heel-Only.html

01-02-2017, 12:40 PM	#4
lawnripper “I don’t feel tardy” Join Date: Aug 2012 Location: Central America Posts: 257	Re: 2000 PDS stock 8in rims Centered or off set? Thanks you guys for the reply and information! Very much appreciated! Happy New Years!!!

Similar Threads
Thread	Forum
Can you use stock rims with 6in A arm lift?	Gas Club Car
stock rims	Electric Club Car
WTB Stock 8" rims	Golf Carts and Parts
centered rims?	Lifted Golf Carts
How big of a tire on a stock cart with stock rims ?	Electric golf carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum