Hesitation with a newly installed XCT400PDS controller

[Tbirddipp]

Originally Posted by scottyb

Take notice if the solenoid is slow to click or if the solenoid clicks and then the pedal has to move down much more before the cart moves.
Do this and report back to me BEFORE you start messing with the settings

I've been busy for the last couple of days so I just saw this. I'm pretty sure that the hesitation happens after the solenoid clicks but I will double check and let you know. The weather has been crappy here the last several days (steady rain) so I haven't really messed with it. I'm going to mess around with it in the next couple of days.
I'm also going to check that % value on the double sided arrow that you mentioned in the above post.
I'll let you know what I find out.

[Tbirddipp]

Originally Posted by cgtech

Well, if you are gonna throw caution to the wind, at least save (or write down) the original values of stuff before you change it. That way if you make it worse, you can go back to where you started.

From what the Alltrax tech told me, if you do a custom change and don't like it then all you have to do is switch it back to standard and all your settings will go back to normal.

[Tbirddipp]

So I checked the number of the double arrow and it was already at 1%.
The relay does click then the hesitation of about 1 to 2 seconds and then the cart moves.
That's all I got to check so far.