|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-07-2017, 08:14 PM | #1 |
Not Yet Wild
Join Date: Sep 2014
Location: Louisiana
Posts: 28
|
EZGO Wont GO
Ok guys hopefully y'all can help. I ran across a deal on a buggy last weekend so i had to buy it! It has a 500 amp 36v controller, and D&D motor Model# 170-002-0001, upgraded wires to motor. Only thing lacking is HD F/R switch which i'm planning to order.
The guy said the solenoid was bad, got it home and it was in fact bad, tested at 4.8 ohms. I ordered a new one from scottyb and put it in today. Checked my wiring twice. Problem i'm having is the buggy will only go in forward and i have to push start it to get it moving, once its moving it wont move very fast almost as if it shuddering when trying to move. wont go in reverse at all, not even with a push. The controller flashes 4 times and the the green light stay on when pushing the throttle. The F/R switch seems to be making good contact. The only logical place left is the motor...hope its not bad, but what is the best way to test the motor? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-07-2017, 09:57 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: EZGO Wont GO
Test the battery voltage at a standstill and then when you are trying to go and it will barely move, what is the voltage then? Post these 2 numbers please.
|
06-08-2017, 06:36 AM | #3 |
Not Yet Wild
Join Date: Sep 2014
Location: Louisiana
Posts: 28
|
Re: EZGO Wont GO
37.8 sitting with no pedal depressed
30.5 with pedal depressed all the way barley moving. |
06-08-2017, 11:48 PM | #4 |
Gone Wild
Join Date: Jan 2016
Location: FL
Posts: 1,067
|
Re: EZGO Wont GO
Yeah you have 1 or more bad batteries you need to load test them. it's normal for the cart to shudder when it's struggling to move because of low voltage, it's a classic sign typically
|
Tags |
controller, f/r switch, motor, soleniod |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
ezgo wont go | Electric EZGO | |||
Ezgo wont go | Gas EZGO | |||
EZGO wont run | Electric EZGO | |||
87 ezgo wont run | Electric EZGO |