RXV Body curvature

Newbuggyboy · 07-28-2019, 06:40 PM

Do all rxv have this curve?

Is there a way to prevent it?

Is the a way to straighten and support?

kernal · 07-28-2019, 07:33 PM

Mine is NOT like that. (2012 chassis but 2016 body)

BobBoyce · 07-28-2019, 08:38 PM

It's thin plastic with no real solid support. You could cut a piece of plywood to support it from behind, watching for the harness when placing it.

Imapled · 07-29-2019, 01:38 PM

Quote:

Originally Posted by BobBoyce

It's thin plastic with no real solid support. You could cut a piece of plywood to support it from behind, watching for the harness when placing it.

I did this with rebar on the bottom edge. Plywood would be easier and cheaper.

Newbuggyboy · 07-29-2019, 03:08 PM

Quote:

Originally Posted by Imapled

I did this with rebar on the bottom edge. Plywood would be easier and cheaper.

Rebar is pretty serious. If I was looking to put Jimmy Hofa in between the cart and batteries ....

Quote:

Originally Posted by BobBoyce

It's thin plastic with no real solid support. You could cut a piece of plywood to support it from behind, watching for the harness when placing it.

Is thin PC for cheap? I think it is also an age thing. The cart body I have is 9-10 years old.

I will take these good suggests. Thanks

kgsc · 07-29-2019, 04:03 PM

If it bothers you that bad pull the mat up and put a screw into the floorboard. Make sure nothing is under it of course. Or a kick plate may pull it out. Us fat guys can't lean that far forward to see that it is bowed..

Newbuggyboy · 07-29-2019, 04:50 PM

Quote:

Originally Posted by kgsc

If it bothers you that bad pull the mat up and put a screw into the floorboard. Make sure nothing is under it of course. Or a kick plate may pull it out. Us fat guys can't lean that far forward to see that it is bowed..

It doesn't bother me. I just noticed it and wondered. I have an ezgo carpet to put over it. The carpet is pretty snazzy.

07-28-2019, 07:33 PM	#2
kernal Gone Wild Join Date: Jul 2010 Location: Peachtree City, Ga. Posts: 2,759	Re: RXV Body curvature Mine is NOT like that. (2012 chassis but 2016 body)

07-28-2019, 08:38 PM	#3
BobBoyce Gone Insane Join Date: Oct 2015 Location: TN/NC/GA Tri-state area Posts: 3,952	Re: RXV Body curvature It's thin plastic with no real solid support. You could cut a piece of plywood to support it from behind, watching for the harness when placing it.

07-29-2019, 04:03 PM	#6
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: RXV Body curvature If it bothers you that bad pull the mat up and put a screw into the floorboard. Make sure nothing is under it of course. Or a kick plate may pull it out. Us fat guys can't lean that far forward to see that it is bowed..

Similar Threads
Thread	Forum
RXV New Body vs Old Body, Lights etc.	Electric EZGO
ISO G22 body and TXT body in Atlanta area	Golf Carts and Parts
1987 DS Needs Body, will 2000 or newer body fit?	Electric Club Car
wanted g-29 body or any body that can be made to fit	Golf Carts and Parts
green body or camo dipped body	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum