|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
01-05-2020, 10:57 AM
|
#1 |
|
Getting Wild
Join Date: Dec 2015
Posts: 100
|
Jakes disc brake kit hub won't fit new spindle
Was installing the Jakes disc brake kit this am. Passenger side existing hub won't go on the new Jakes spindle? The drivers side went on no issue. I tried to nicely beat it on with a rubber mallet but it seems that the spindle is slightly too big for the bearings?
Also as a side for anyone that has installed this kit it seems like the rotors studs pass through the existing hub but nothing holds the disc to the hub except once you put the. wheel and lug nuts on which is a pain because essentially you have to hold the disc from the back to line up the studs or did I do something wrong? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-05-2020, 05:30 PM
|
#2 |
|
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: Jakes disc brake kit hub won't fit new spindle
I had one like that. They had painted the spindle so I had to sand the spindle slightly.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Jakes Disc Brake Q | Electric Club Car | |||
| Jakes disc brake install 08 RXV | Electric EZGO | |||
| Brake cable snapped, disc brake conversion? | Electric EZGO | |||
| Disc brake for 98 txt with jakes long travel | Electric EZGO | |||
| Jakes Front Disc brake help | Electric EZGO | |||
Linear Mode
