|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-24-2020, 09:22 AM | #11 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 05 Precedent Just Stopped Moving
following...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-30-2020, 11:18 PM | #12 | |
Getting Wild
Join Date: Jan 2010
Posts: 100
|
Re: 05 Precedent Just Stopped Moving
Thanks for the tip about double wrenching, but I learned that many years ago the hard way. Is there an easy way to get to the motor if you have rear seats installed? I do have voltage to, dependent upon pedal depression, on the white and green wires leaving the controller in the battery compartment. I've just never had an electric motor quit without some indicator before.
Quote:
|
|
02-06-2020, 05:52 AM | #13 | |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: 05 Precedent Just Stopped Moving
Quote:
Jack it up and remove it from below....Did you test it... |
|
02-22-2020, 07:31 PM | #14 | |
Getting Wild
Join Date: Jan 2010
Posts: 100
|
Re: 05 Precedent Just Stopped Moving
Sorry to take so long responding but the wife had a week long job related trip and the weather has been terrible. I finally had a chance to do some testing.
Quote:
A1 to A2..no beep F1 to F2..beep A1 to F1..no beep A1 to motor body..no beep F1 to motor body..no beep A1 moves up and down and moved back and forth before i removed the wire from the controller. A1 does not spin freely. but does move freely over approximately a 270 degree arc. Are my options rewind the motor or replace it? I would like to use the stock controller until it quits and I have to be economical (cheap) with a wife, three kids, and two dogs! |
|
02-22-2020, 07:37 PM | #15 |
Getting Wild
Join Date: Jan 2010
Posts: 100
|
Re: 05 Precedent Just Stopped Moving
|
02-23-2020, 09:36 AM | #16 | |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 05 Precedent Just Stopped Moving
Quote:
|
|
02-23-2020, 12:00 PM | #17 |
Getting Wild
Join Date: Jan 2010
Posts: 100
|
Re: 05 Precedent Just Stopped Moving
Who would y'all recommend to rewind the motor or would it be better to buy a new one I would like a bit more torque, but would also like to retain my stock controller until it fails.
|
02-23-2020, 06:18 PM | #18 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 05 Precedent Just Stopped Moving
It probably just broken brush at the stud. Remove the motor and open it up and check it.
If you wanna beef it up, you can send it off to Plum Quick for a Bandit upgrade. You can look here https://www.revolutiongolfcars.com/motors for replacement motors to meet various needs. |
02-23-2020, 09:06 PM | #19 |
Getting Wild
Join Date: Jan 2010
Posts: 100
|
Re: 05 Precedent Just Stopped Moving
Took it apart today. Unfortunately it's a bit worse than a broken wire at the stud. I know I need brushes and the plate that holds them. Now I'm debating the cost difference between a new high torque motor and fixing this one. Brushes are from revolutiongolfcars.com
Motor Brush Package, for Club Car AMD/ADC IQ/Excel Motor SKU: 102186201 $65.58 from http://www.revolutiongolfcars.com/ I always try to site sponsors, but I don't see the base plate, for lack of a better term, in motor repair parts. suggestions are appreciated. If the repair cost is 1/2 or less the cost of a upgraded motor I'll fix this motor. If more I'll get a new high torque motor that is compatible with the stock controller. When the controller and relay go I plan on upgrading to at least a 500amp controller. 2GA wires are already installed from the 4 to 6 battery conversion I did last year. Thanks for your technical support. |
02-23-2020, 10:21 PM | #20 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: 05 Precedent Just Stopped Moving
Usually when a motor eats itself you end up with an internal short that also takes out the controller. Since it looks like only the armature cables were affected you might have got lucky. But then again, if you have the eventual plan to upgrade the controller anyway... now might be the time.
A brush holder and new brushes will probably be $150 or so in parts. And because there’s so little demand, it’s Hard to make that back even if you sell the motor. Can’t beat the combo deal on the new motor and controller... |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stopped moving | Electric EZGO | |||
95 Club Car 48v Stopped moving | Electric Club Car | |||
Just stopped moving?? | Electric Club Car | |||
g1 stopped moving | Gas Yamaha | |||
Par car stopped moving | Columbia ParCar |