|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-04-2020, 01:00 PM | #1 |
Not Yet Wild
Join Date: Dec 2019
Posts: 37
|
will this controller work?
i have a 2013 txt and found a 1264-5407 400amp curtis controller on facebook. i know this usually comes in the shuttles, but can i change parameters to make it work in my txt? currently i have the 1206 5201 250amp in my cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-04-2020, 01:25 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: will this controller work?
It might be possible, but there are a couple issues. (See attached schematics)
1. The control wiring on the 1206HB you have is attached via a single 16 pin plug and the 1264 has two plugs for control wiring, one 24 pin and one 6 pin, so it would take some rewiring skills. 2. The field map loaded in the 1264 may not match the motor in your TXT-48 cart and I'm not sure if the correct field map is obtainable or user loadable. ------------- If you need a controller for your cart, go with an Alltrax XCT48400-TXT48 (or larger), which has the same wiring as a 1206HB and is user programmable. |
02-04-2020, 01:41 PM | #3 | |
Not Yet Wild
Join Date: Dec 2019
Posts: 37
|
Re: will this controller work?
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
IQDM-P doesn't work when plugged into controller | Electric Club Car | |||
Will this controller work for 36v to 48v conversion | Electric Club Car | |||
Will a 99 ezgo series controller work on 01 pds? | Electric EZGO | |||
Controller that will work with 36v for future 48-72v upgrade. | Extreme DC! | |||
Will my '02 controller work in a '96 DCS | Electric EZGO |