Alltrax sr help

[Lopaka55]

Hey guys,
I’m in the process of trying to install my Alltrax sr and I’m having some trouble. I’m also do the f&r toggel conversion. Should my red from j1 go to a small terminal on the solenoid or a big one? Also where do the blue and green wires from my key switch connect to now? I’m very confused been trying to read over the wire diagrams and can’t figure it out at all. Thank you for any help it will be greatly appreciated. Also just noticed I have a green light when I push the go pedal and if I jump the j1 red to one of the big solenoid terminals I get a solid green light too.

[jeffro22]

small red-

Here is a good read from scottieB with pictures https://buggiesgonewild.com/showthread.php?t=117069

[Lopaka55]

Thank you. I put it on the small red and now when I push the go pedal my solenoid clicks and I have a green light,but I have my blue wire from the key wires straight to a hot from the battery pack. I know that’s not right. Where should the blue wire be hooked up at?

[jeffro22]

I Just had the same question and ended up connecting my blue wire to the B+

cart seems to be operating correctly

[Lopaka55]

Okay I’ll give that a try thank you