|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-14-2010, 06:58 AM | #1 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Wheel size...
I have been reading a couple threads about wheel size... I am looking for a 10x8 or 10x10 aluminum wheel with total negative offset I have total neg offset on my sandrail paddles... Would a 10x7 work (and look decent) on a lifted G9? I'm wanting the tire to stick out far enough so I can add fender flares without making it look like a "muffintop" Thanks in advance!! By the way, my lift will most likely be a Jakes Long Travel... Not sure if this helps
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-16-2010, 07:01 PM | #2 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: Wheel size...
Bump
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Wheel and tire size for a cc precedent | On Road Golf Carts! | |||
Need your opinion on Wheel/Tire size For 2006 CC | Lifted Golf Carts | |||
Wheel bolt pattern size? | Electric Club Car | |||
wheel size ? | Lifted Golf Carts | |||
Tire and wheel size on workhorse | Gas EZGO |