|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-20-2011, 02:06 PM | #1 |
Not Yet Wild
Join Date: Jul 2009
Posts: 10
|
1997 g 16a
Hello,1997 G 16A, bought several months ago....brake pedal was low...On june 16,2011,my buddy installed new shoes on the automatic adjust system......but, while on the jack, by hand,each wheel just barely spin......drove it down small incline.... slower than before install, But up the incline very slow...Brake pedal is very high now, barely touch it to stop now.....what did we do wrong?? any suggestions,
Thanks for looking....fish hook Last edited by fish hook; 06-20-2011 at 02:18 PM.. Reason: added attempted repair date |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-20-2011, 05:42 PM | #2 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: 1997 g 16a
Sounds like you just need to back off the "star" adjuster to compensate for the new, thicker pads......
|
06-20-2011, 05:45 PM | #3 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 1997 g 16a
Or cable tension under the floor?
|
06-25-2011, 01:34 PM | #4 |
Not Yet Wild
Join Date: Jul 2009
Posts: 10
|
Re: 1997 g 16a
Hey Crash, did the cable tension.....thanks MUCH
|
Tags |
auto adjust, new brake shoes |
|
|
Similar Threads | ||||
Thread | Forum | |||
1997 EZGO gas 1997 not firing | Gas EZGO | |||
1997 ez-go txt | Gas EZGO | |||
1997 EZ Go - Won't go | Electric EZGO | |||
1997 DCS value | Electric EZGO | |||
1997 48V won't run | Electric Club Car |