Need motor

[sentrek]

I just ordered a 250 from that site to replace a kf82. I'll Let you know how it works out once I get it installed.

[GEEGONKEY]

Thank you!

[sentrek]

Received the engine and looks like it will work. Needs some modification. The output shaft is longer on this engine so it will need to be moved towards the drivers side so the clutches will be aligned. Clutch fits on the shaft. Clutch holding bolt is one size smaller. Has a port on the top of the engine for the fuel pump. I'm going to use the starter and charging system that came on the engine. Wouldn't be hard to use the stock starter generator though. Just remove the starter and make a block off plate. It's not a bolt in replacement but not too hard to make it work. I'll let you know how the power is once I get time to get it installed.

[GEEGONKEY]

Awesome info!Keep me posted and if you can send me some pic's of the build.

[sentrek]

Got the engine running! It runs great. It seems to have good power. Not a 400 but it moves the cart well. It sputters a little at the top end but I am not using the stock air box so I think it needs to be jetted. I put the 200 rpm spring in the drive clutch so it will idle. I'll post some pics when I get the chance.