|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-22-2014, 09:51 PM | #1 |
Not Yet Wild
Join Date: Jun 2014
Location: saluda s.c.
Posts: 7
|
2000 series will not move
hello everyone new to this forum, looks like a super good forum. went out today and my cart would not move. solenoid will click but will not move. checked batteries have 36.6 volts. batteries only one year old. cart ran fine yesterday. what should I checked next. thanks for any help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-22-2014, 10:06 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2000 series will not move
Charge those batteries ASAP.
Do you have a stock controller or an upgrade? |
06-23-2014, 04:57 AM | #3 |
Guest
Posts: n/a
|
Re: 2000 series will not move
|
06-23-2014, 06:52 AM | #4 |
Not Yet Wild
Join Date: Jun 2014
Location: saluda s.c.
Posts: 7
|
Re: 2000 series will not move
cart is stock
|
06-23-2014, 07:32 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2000 series will not move
Is it charging yet?
|
06-23-2014, 07:44 AM | #6 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2000 series will not move
Hope so. I posted within 15 minutes of original post and he's on East coast, like me.
|
06-23-2014, 07:52 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2000 series will not move
|
06-23-2014, 08:00 AM | #8 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2000 series will not move
Since you're new here, Welcome.
Since your batteries are only one year old, go here and read everything about batteries: http://www.cartsunlimited.net/How_Batteries_Work.html http://www.cartsunlimited.net/Batter..._Tutorial.html http://www.cartsunlimited.net/Batter...n_Methods.html and Trojan's website also has some good videos and .pdfs. At that voltage reading - 36.6 volts - I'd be heading home, not going out. |
06-23-2014, 08:14 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2000 series will not move
It would be helpful if after charging he could let the pack sit idle for 12hours and give us the standing voltage of the pack. Should be about 38.4 volts. Then if he could attach the meter to the pack (I use alligator clips) and tell us how low the meter drops when he gives full throttle.
|
06-23-2014, 08:26 PM | #10 |
Not Yet Wild
Join Date: Jun 2014
Location: saluda s.c.
Posts: 7
|
Re: 2000 series will not move
batteries are fully charged. I performed the test that scottyb has a the top of this forum. going buy those test procedures I need a controller because I have no controller output.factory controller is a Curtis pmc part number 25864g05. what would yall recommend for a new controller
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1996 Series DS 48V won't move on ground, wheels barely move on jacks | Electric Club Car | |||
2000 ezgo series cart won't move | Electric EZGO | |||
2000 DS won't move | Electric Club Car | |||
2000 txt Won't move? Plw | Electric EZGO | |||
96 CC 48V series no move... | Electric Club Car |