MCOR ... Impossible??

Bill In Georgia · 04-07-2016, 05:02 PM

I have a DS cart with a A0033 model number. But my 2000 service manual shows a Multi-Step Pot and not a MCOR. But I finally realized that little black box is indeed a MCOR.
But how in the world do you get at it ... I pulled up the matt and found a solid steel plate...Does this plate come off?? Do I block up the entire cart and lay underneath .... Or hoist the whole cart in the air on end? Or cut a door in the plate....
I'm also confused as to what new manuals to order??

Bill

mrgolf · 04-07-2016, 05:06 PM

If you look real close at your serial number it may be AQ03the mcor is bolted on the backside of the frame rail. I think they are 7 mm.

You have a 2003 cart.

Bill In Georgia · 04-07-2016, 05:31 PM

So you jack it up and lay under to get it unbolted??

mrgolf · 04-07-2016, 06:56 PM

You can just reach under and unbolt it. It you jack it up use jack stands.

Bill In Georgia · 04-07-2016, 07:37 PM

OK .. Thanks.. Will give it a try..

-Bill

shar1950 · 04-10-2016, 11:28 PM

how do you test if this unit is good or bad ?

04-07-2016, 05:02 PM	#1
Bill In Georgia Not Yet Wild Join Date: Sep 2008 Posts: 62	MCOR ... Impossible?? I have a DS cart with a A0033 model number. But my 2000 service manual shows a Multi-Step Pot and not a MCOR. But I finally realized that little black box is indeed a MCOR. But how in the world do you get at it ... I pulled up the matt and found a solid steel plate...Does this plate come off?? Do I block up the entire cart and lay underneath .... Or hoist the whole cart in the air on end? Or cut a door in the plate.... I'm also confused as to what new manuals to order?? Bill

04-07-2016, 05:06 PM	#2
mrgolf Old Sky Soldier Join Date: Dec 2011 Location: Kentucky Posts: 3,881	Re: MCOR ... Inpossible?? If you look real close at your serial number it may be AQ03the mcor is bolted on the backside of the frame rail. I think they are 7 mm. You have a 2003 cart.

04-07-2016, 05:31 PM	#3
Bill In Georgia Not Yet Wild Join Date: Sep 2008 Posts: 62	Re: MCOR ... Inpossible?? So you jack it up and lay under to get it unbolted??

04-07-2016, 06:56 PM	#4
mrgolf Old Sky Soldier Join Date: Dec 2011 Location: Kentucky Posts: 3,881	Re: MCOR ... Inpossible?? You can just reach under and unbolt it. It you jack it up use jack stands.

04-07-2016, 07:37 PM	#5
Bill In Georgia Not Yet Wild Join Date: Sep 2008 Posts: 62	Re: MCOR ... Inpossible?? OK .. Thanks.. Will give it a try.. -Bill

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-10-2016, 11:28 PM	#6
shar1950 Not Yet Wild Join Date: May 2014 Posts: 20	Re: MCOR ... Inpossible?? how do you test if this unit is good or bad ?
shar1950 Not Yet Wild Join Date: May 2014 Posts: 20

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Club Car MCOR II to MCOR 4 Upgrade - Removing Pivot Rod?	Electric Club Car
Honda 24hp impossible to shift	Gas EZGO
Is a lifted cart that is right for me impossible to find?	Lifted Golf Carts
the impossible clutch	Gas Club Car